Hardware
Cases
|
Any of the pedals may be fitted into any of the cases. The small grey die-cast box is battery only, the others also have a 2.1mm 9vdc neg tip socket for a "Boss" type PSU. |
||
|
|
|
|
A small sturdy die-cast box that makes a good enclosure for the Booster. The lack of a power socket should not be a problem as all of my pedals have low power requirements.
This is the basic configuration and a pedal built in this box will cost £40. |
A sheet aluminium enclosure that is polished and then lacquered to maintain the shine. This box is not as durable as the die cast enclosures and will need to be treated with a bit of care. A pedal built in this box will cost £40. The solid aluminium knobs in the picture add a further £2 to the cost. |
A larger die-cast box that is given an oven baked enamel finish to make a sturdy pedal that is well suited to live use. A pedal built in this box will cost £45. |
Paint
I'm currently experimenting with different colours and finishes and hope to be able to offer a wider range soon. At the moment I have white, pearlescent white, pink, or metallic purple available.All the boxes get primed, given 2 coats of (oven baked) enamel, and then a layer of clear lacquer to finish them off.
L.E.D.s
L.E.D.s are now available in a wide variety of colours and light levels and if I am able to obtain them then I will fit whatever colour you require. Generally, the brighter the LED the more power it consumes and this can have a significant impact on battery life. I usually set them fairly dim to preserve batteries but if you want to be able to signal passing shipping then let me know and I will adjust the brightness!I always have standard brightness greens and reds at no extra cost and can usually fit "superbrites" for an extra £1. Colours depend on availability.
Currently I have "superbrite" blues, pinks, reds, and aqua in stock.
Possible colours:
- Red
- Green
- Amber
- Orange
- Pink
- Blue
- White
- Aqua